We recommend that you print this page to have a hardcopy checklist for the isntallation process.

CLICK HERE for QFU/400 software download.

After downloading the software, download the user's guide. It is in Adobe Acrobat format. If you do not have the Acrobat Reader, click on the icon below to get your free copy from Adobe:

CLICK HERE to download user's guide in Adobe Acrobat format.

To get your free copy of Adobe Acrobat Reader, CLICK HERE

To install QFU/400 on your system from the QFU_CD_Image_014.ZIP file you received via E-mail or Website Download, please follow these exact instructions. Please note that these instructions can be used whether you are installing QFU/400 for the very first time or if you are upgrading an existing QFU/400 installation.

1. Sign on to your System i from a PC that is configured for iSeries Access. You must sign on using the special IBM-supplied user profile QSECOFR.

2. Run the following command to create an IFS folder to hold the CD image file:

   MKDIR DIR(kiscocd)

3. Run the following command to create a virtual optical device:

   CRTDEVOPT DEVD(OPTVKISCO) RSRCNAME(*VRT) TYPE(632B)

4. Run the following command to create an image catalog:

   CRTIMGCLG IMGCLG(KISCOCAT) DIR(kiscocd)

5. From your PC, create a folder on your desktop named TEMP and move the QFU_CD_Image_014.ZIP file into it, then unzip it to create the installation file named QFU_CD_Image_014.iso.

6. From your desktop, click on the iSeries Navigator. When it opens, all operations here will take place on the right side of the display box. Click on the following sequence of items displayed:
   • Your System i location
   • File Systems (Note: if this does not appear, you will have to install additional iSeries Access functions on your PC to complete this procedure.)
   • Integrated File System
   • root
   • kiscocd
   Now drag and drop the file from the TEMP folder on your PC desktop into the right-hand box of the iSeries Navigator display. This will transfer these files into the folder. (Note, you do not need to transfer the zip file itself.)

7. Now go back to the command line and run the following command to load the file into the image catalog:

   ADDIMGCLGE IMGCLG(KISCOCAT)
   FROMFILE('/kiscocd/QFU_CD_Image_014.iso')

8. From the command line, run the following command to load the image catalog entry:

   LODIMGCLGE IMGCLG(KISCOCAT)

9. From the command line, run the following command to load the image catalog:

   LODIMGCLG IMGCLG(KISCOCAT) DEV(OPTVKISCO)

10. From the command line, run the install process with the following command:

    LODRUN DEV(OPTVKISCO)

    This will install the software on your system for your thirty day trial period.

11. To start using QFU/400, type the following command and prompt it for parameters using the F4 key:

    QFULIB/VIEW 

    or you can display the user menu for QFU/400 by keying the following command:

    GO QFULIB/MASTER

When you have completed your evaluation of QFU/400, you may purchase a permanent installation copy by contacting us and arranging payment.

Return to QFU/400 Page