Kisco Software Support - QFU/400

Last Updated: April 27, 2001
Current Release Level: 1.0 - available June 9, 1997. Release is for customers with systems running OS/400 V3R1 or higher.

To register your E-mail address and receive automatic notification when this page is updated, CLICK HERE

QFU/400 Problem Reports

Problem Report Dated: April 27, 2001

Affected release levels: All copies of QFU/400 distributed prior to April 27, 2001 when used under any level of OS/400.

Problem Description:

Occasionally, when browsing a file, the viewing program abnormally terminates due to a decimal data error.
Problem Resolution:
QFU/400 has now been sensitized to check for decimal data errors and continue operating when they are found. Some information displayed may be incorrect, but we felt it was better to have the program run rather than terminate abnormally. This will also permit users to correct bad data that is discovered.

If you have QFU/400 Release 1.0 with this problem and you would like to receive a PTF to correct it, just send us an E-mail request and we'll return the PTF file to you by return E-mail. When ordering the PTF, specify PTF package name QFPTF007. You will find an E-mail link to us on this page (see below).

Problem resolved on: April 27, 2001
Problem Report Dated: September 23, 1998

Affected release levels: All copies of QFU/400 distributed prior to September 22, 1998 when used under any level of OS/400.

Problem Description:

When using QFU/400 to work with a file with a highly fragmented key, QFU/400 fails with error message MCH0603.
Problem Resolution:
QFU/400 only permitted 35 key fragments on any single file. We have now increased this limit to 45 key fragments.

If you have QFU/400 Release 1.0 with this problem and you would like to receive a PTF to correct it, just send us an E-mail request and we'll return the PTF file to you by return E-mail. When ordering the PTF, specify PTF package name QFPTF005. You will find an E-mail link to us on this page (see below).

Problem resolved on: September 22, 1998
Problem Report Dated: September 3, 1998

Affected release levels: All copies of QFU/400 distributed prior to September 12, 1998 when used under any level of OS/400.

Problem Description:

When using QFU/400 to work with a file with a highly fragmented key, QFU/400 fails with error message MCH0603.
Problem Resolution:
QFU/400 only permitted 20 key fragments on any single file. We have now increased this limit to 35 key fragments.

If you have QFU/400 Release 1.0 with this problem and you would like to receive a PTF to correct it, just send us an E-mail request and we'll return the PTF file to you by return E-mail. When ordering the PTF, specify PTF package name QFPTF005. You will find an E-mail link to us on this page (see below).

Problem resolved on: September 11, 1998
Problem Report Dated: April 24, 1998

Affected release levels: All copies of QFU/400 distributed prior to April 25, 1998 when used under any level of OS/400.

Problem Description:

A customer added the QFU/400 application library name (QFULIB) to his library list to simplify use of the product. This was fine for the first use of QFU/400 during a signon session but the library was removed from the library list following the initial use. Subsequent attempts to use the product without a library reference failed.
Problem Resolution:
QFU/400 was forcing the library name into the library list if not already there. It was also forcibly removing the name from the library list when done with each use. Since the product has now been modified to work from a standard IBM command call, this is no longer needed in the program and it has now been removed.

If you have QFU/400 Release 1.0 with this problem and you would like to receive a PTF to correct it, just send us an E-mail request and we'll return the PTF file to you by return E-mail. When ordering the PTF, specify PTF package name QFPTF004. You will find an E-mail link to us on this page (see below).

Problem resolved on: April 24, 1998
Problem Report Dated: January 13, 1998

Affected release levels: All copies of QFU/400 distributed prior to January 13, 1998 when used under any level of OS/400.

Problem Description:

When using the WRKDDS function from the file structure display, QFU/400 fails with error CPF2130.
Problem Resolution:
The problem is due to two missing objects in the QFULIB library. A PTF is now available to address this situation. If you have QFU/400 Release 1.0 with this problem and you would like to receive this PTF, just send us an E-mail request and we'll return the PTF file to you by return E-mail. When ordering the PTF, specify PTF package name QFPTF003. You will find an E-mail link to us on this page (see below).
Problem resolved on: January 13, 1998
Problem Report Dated: January 12, 1998

Affected release levels: All copies of QFU/400 distributed prior to January 12, 1998 when used under OS/400 V3R2.

Problem Description:

When using the View Tree function, QFU/400 fails with error message CPF4131 followed by reporting of error message RPG1217 in program VIEWT.
Problem Resolution:
Found the problem, which was due to a change in a system provided file layout, and corrected the program to handle this situation correctly. A PTF is now available to address this situation. If you have QFU/400 Release 1.0 with this problem and you would like to receive this PTF, just send us an E-mail request and we'll return the PTF file to you by return E-mail. When ordering the PTF, specify PTF package name QFPTF002. You will find an E-mail link to us on this page (see below).
Problem resolved on: January 12, 1998
Problem Report Dated: September 22, 1997

Affected release levels: All copies of QFU/400 distributed prior to September 23, 1997 when used under OS/400 V3R2.

Problem Description:

When attempting to use the Search and Replace function, QFU/400 fails and issues error message CPF4131.
Problem Resolution:
Found the problem, which was due to a change in a system provided file layout, and corrected the program to handle this situation correctly. A PTF is now available to address this situation. If you have QFU/400 Release 1.0 with this problem and you would like to receive this PTF, just send us an E-mail request and we'll return the PTF file to you by return E-mail. When ordering the PTF, specify PTF package name QFPTF001. You will find an E-mail link to us on this page (see below).
Problem resolved on: September 23, 1997

Contact Information

Kisco Information Systems
7 Church Street
Saranac Lake, New York 12983

Phone: (518) 897-5002 Fax: (518) 897-5003

E-mail your questions or suggestions: Support@Kisco.com

Return to Customer Support Page

Return to QFU/400 Product Page